Armorduct offer a wide range of products with a selection of finishes to suit both indoor and outdoor installations.
From aesthetic considerations to withstanding aggressive or corrosive environments we can recommend the best finish for you
ALI: Aluminium
Available for Dado, Skirting and Flush Floor Trunking
Please add /ALI to your part number
BR: Brass
to standard ASTM B121 / B121M-16
Recommended for internal decorative light duty floor solutions. Antique Brass also available, please use /ABR
Available for Cavity & Screed Floor Boxes
Please add /BR to your part number
BZP: Bright Zinc Plate
to standard BS 10244-2
Standard finish available for Cable Basket
Please add /BZP to your part number
CPC: Clear Polyester Coated
Meets the full requirements of BS6496/7.
Clear Polyester Coating is recommended for use in both interior and exterior applications. It is established as an alternative to the traditional post-galvanising process
Uses of CPC finish include installation in corrosive atmospheres such as chemical plants, battery rooms, marine environments or general outside use where post galvanised or stainless steel systems have been commonly specified in the past. In such installations, CPC offers a more cost effective solution when combining the factors of mechanical performance, ease of installation and endurance
Please add /CPC to your part number
PC: Powder Coated
to standard BS EN 13438: 2013
Recommended for interior use although the extra coating in conjunction with the galvanising process does make it non corrosive to a higher standard than the basic PG. You can select your finish in a BS or RAL colour number. Great solution when you have aesthetic considerations. Standard white RAL colour is 9003 unless otherwise stated Available for Basket, Tray, Cable Trunking, Lighting Trunking, Floor boxes, Aluminium and Dado Skirting Please add /PC to your part number
HDG: Hot Dipped Galvanised
to standard EN ISO 1461
Recommended for both indoor and outdoor installation and especially more aggressive and corrosive conditions
Available for Basket, Tray & Trunking. All HDG trunking is only available in 2m lengths
Please add /HDG to your part number
MAG: Magnelis
Complies to BS EN 10346: 2015
An innovative metallic coating that offers protection in the harshest environments
Contact us for results of our 1000 hour salt test
Available for Cable Trunking and Cable Tray
Please add /MAG to your part number
PG: Pre-Galvanised
to standard BS EN 10346: 2015& DX51Z-275MAC
Recommended for non corrosive interior installation i.e data centres
Available for all Trunking, Tray, Basket
Please add /PG to your part number
SS: Stainless Steel
grade to standard BS EN 10088-2: 2014
Recommended for external use, food or chemical areas. 304 or 316 available (except floor boxes – only 304). You will be supplied 304 unless otherwise stated Available for Basket, Tray, Cable Trunking, Conduit, Conduit Fittings and Floor Boxes Please add /SS to your part number
LSF: Low Smoke Fume
Only available in PC or CPC finishes
With increased demand for safety in public areas and buildings, contractors are being advised to install materials that are less hazardous to members of the public in the case of a fire. Low smoke and fume protection houses fewer plastics, reducing risk by releasing less smoke and poisonous fumes.
